Toto NEOREST 550, Инструкция по эксплуатации

Страница: 49 / 60

49
3
Insert the power plug into the outlet
Operate wash function
2
Open the water shutoff valve
1
Cover the seat sensor with piece of paper, have a paper cup ready to catch the water
and push on the remote control. Allow water shoot out of the nozzle for at least 2min.
Confirm there is no leakage in the pipe or in the top unit.
Drain out the water in the top unit
Detach the power plug
Take care of any retained water
1
2
Keep pushing the drainage lever
Release the drainage lever. The lever
returns to its original position.
3 Re-install the cover
About 0.11gal.(40ml) of water flows out from
the top unit into the toilet bowl. It will take 10
seconds for the water to drain out completely.
5
6
4
Drain the water from in the wand
3
3
Fasten the filter cap firmly
A loose water filter cap will
cause water leakage
Mandatory
When the water is drained, put the water supply filter into
its place and use the screw driver to fasten it firmly.
Turn right Turn right
Drain valve water filter
Screw driver
To restore water when water has been turned off
It is advisable to add an antifreeze agent to the retained water.
Push Push
Re-install
Restore Restore
Cover
Drainage lever
Drainage lever
1
2
Push on the remote control
When water has been drained out, push
again
(Then the nozzle retracts to its original position.)
Solution
Tip
Caution
Open the cover