Toto NEOREST 550, Инструкция по эксплуатации

Страница: 48 / 60

Turn right
Push
Restore
Tip
48
Turn OFF antifreezing mode, repeat the steps above
The POWER and SEAT lights will stop flishing when the
antifreezing mode is turned OFF
See page 47, 48 antifreeze action
Disabling antifreeze mode
Light on
POWER light on the top unit flashes
indicating antifreeze mode is ON.
About 0.0026gal (50ml) of warm water
will flow out of the wand nozzle every 5min.
The NEOREST is flushed every 10 minutes.
Flashing
Top unit display
The setting has been changed.
The antifreeze mode is on.
The clock display has resumed.
10:00
Preventing freezing
Set the warm water temperature and seat temperature to High on the remote control.
Close the toilet bowl lid.
A M
Turn left
Cloth
Water filter
screw driver
Cover
Remove
3
Stagnant water may cause skin irritation or may damage the product. Drain out the water to prevent this.
If the unit is moved to another location, you should drain out the toilet bowl to prevent freezing.
: If the NEOREST is not being used for an extended period of time
2
Drain the water in the pipe 2
Turn off the water supply using the water shutoff valve 1
Open the NEOREST lid
Drain out the water
1
2
Remove the cover
Do not!
Loosen the water supply filter with a
screw driver, then pull it out.
Push to extend the wand,
then push again to retract it.
(This releases the pressure in the pipe.)
NEOREST
power plug
Close the remote control lid
Push again
[ Current time ]
Confirm this!
Confirm this!
Caution
Solution
Do not attemp to remove the water
supply filter if the water shutoff valve
is open. Water will spray out.
Top unit display