6
ENGLISH
Refer to the water level line stamp inside the tank.
1. The water level adjustment is located in the top
end of the fill valve. Use a flathead screwdriver
to make adjustments:
• To raise the water level: turn the
screwdriver clockwise, or towards the ‘+’
indicator.
• To lower the water level: turn the
screwdriver counter-clockwise, or towards
the ‘-’ indicator.
2. Flush after each adjustment to check the water
level. When satisfied with the water level, flush
once more to verify.
ADJUSTING THE WATER LEVEL
ill. 1
water level adjuster
No CEFIONTECT®
With CEFIONTECT®
WHAT IS CEFIONTECT®?
CEFIONTECT® is TOTO’s super-smooth permanent glaze that prevents debris
from sticking to surfaces. Products with the letter “G” in the number have the
CEFIONTECT® glaze. This glaze, along with regular cleaning, will help keep
your TOTO product in pristine condition.
NOTE
:
For best results to keep your TOTO product with CEFIONTECT® clean:
• Lavatory: Use a mild dish detergent with a clean, soft cloth.
• Toilet: Use a gel based cleaner with a soft bristled-plastic brush.
•
Don’t use
cleaners, polishing powders or detergents that have gritty or
coarse particles.
•
Don’t use
bleach, chemical thinners or products that have acid or alkaline
detergents listed as ingredients.
•
Don’t use
metal scrub brushes or steel wool.
Following these instructions will ensure that your TOTO product with the
CEFIONTECT® glaze will always stay intact, keeping your product like new for
years to come!
CEFIONTECT® CLEANING INSTRUCTIONS
6. Connect water supply to fill valve shank and hand-tighten only.
7. Attach refill tube to fill valve nipple clip other end to the overflow pipe.
8. Turn water supply ON and check for leaks outside the tank.
NO TE:
Do not overtighten. These are plastic parts. Never use pipe dope on any water
supply connection. As water fills the tank, water is also directed into the overflow tube
via the refill tube. This
additional flow of water is critical to refilling your toilet’s bowl. Once the water stops
filling the tank, some residual drops may drip from the fill valve. This is NORMAL as
these drops will subside.
MAINTENANCE INSTRUCTIONS
Fill Valve Replacement Procedure (continued)
