3
ENGLISH
INCLUDED PARTS
Faceplate *
Volume Control Assembly
(Legato Models)
Set Screw & Hex Wrench
Valve with Plaster Guard *
TS2A or TS2D
* Actual product may vary in appearance depending on the model.
Check to make sure that all these parts were included in your packaging:
REQUIRED -
NOT INCLUDED
Volume Control Assembly
(Aimes Models)
Handle
(Legato Models)
INSTALLATION PROCEDURE
1) Confirm that the valve has been
installed properly.
N OTE: The finished wall surface
should be between the min and
max markings on the plaster guard.
See the TS2A/TS2D installation
manual for further information.
Max 95 mm (3 3/4")
Min 65 mm (2 1/2")
Plaster Guard
Volume
Control
Valve
Finished Wall
2) Remove the four screws secur-
ing the plaster guard to the
valve body, then pull the plaster
guard outwards to remove it.
IM PORTANT:
Retain the four
plaster guard screws for use
in Step 4.
Screws
Plaster Guard
Valve Body
Trim
Valve
TS624C2#$$
TS2A
TS626C2#$$
TS624D2#$$
TS2D
TS626D2#$$
