Toto 20899, Руководство пользователя

Страница: 19 / 96

Servicing the Air Filter
Service Interval: Before each use or daily
Yearly
1. Press down on the latch tabs on top of the
air-filter cover (
Figure 40 ).
g002902
Figure 40
1. Latch tabs
2. Open the cover.
3. Remove the air filter ( Figure 41 ).
g002903
Figure 41
4. If the air filter is damaged or is wet with oil or
fuel, replace it.
5. If the air filter is dirty, tap it on a hard surface
several times or blow compressed air less than
207 kPa (30 psi) through the side of the filter
that faces the engine.
Note:
Do not brush the dirt off the filter;
brushing forces dirt into the fibers.
6. Remove dirt from the air-filter body and cover
using a moist rag.
Do not wipe dirt into the
air duct.
7. Install the air filter.
8. Close the cover.
Changing the Engine Oil
Service Interval: Yearly
Note:
Run the engine a few minutes before changing
the oil to warm it. Warm oil flows better and carries
more contaminants.
Engine Oil Specifications
Engine oil capacity
0.55 L (18.6 fl oz)
Oil viscosity SAE 30 or SAE 10W-30
detergent oil
API service classification SJ or higher
1. Move the machine to a level surface.
2. Refer to Preparing for Maintenance (page 17) .
3. Remove the dipstick by rotating the cap
counterclockwise and pulling it out (
Figure 42 ).
g010271
Figure 42
4. Tip the machine onto its side (so that the air
filter is up) to drain the used oil from the oil-fill
tube (
Figure 42 ).
g010272
Figure 43
5. After draining the used oil, return the machine to
the operating position.
6. Carefully pour about 3/4 of the engine capacity
of oil into the oil-fill tube.
7. Wait 3 minutes for the oil to settle in the engine.
8. Wipe the dipstick clean with a clean cloth.
9. Insert the dipstick into the oil-fill tube, but do not
screw it in, then remove the dipstick.
10. Read the oil level on the dipstick ( Figure 16 ).
18