background image

 

 

 

 

 

 

 

Dangers by electrical energy 

  Work at the electrical equipment is only to be carried out by an electronic expert.  

  The electronic equipment of the air dehumidifier is to be checked regularly. Loose connections and 

damaged cables should be repaired at once. 

  The  switch  box  should  be  closed  all  the  time.  It  should  only  be  opened  by  authorized  personnel 

with the right tools. 

  If work is necessary on parts under tension, a second person should be there to switch off tension 

in case of emergency. 

Maintenance and Removing failures 

  Required adjustment, maintenance and inspection work are to be carried out timely. 

  Inform operation personnel before maintenance work. 

  All  equipment  and  connections  linked  up  with  the  dehumidifier  are  to  be  safeguarded  against 

unintentional operation.  

  With all  maintenance,  inspection  and  repair  work  the dehumidifier  should  be  switched  off  and  the 

main switch should be secured against switching on. 

  Put on a warning sign against switching on.  

  Loosened screws are to be checked that they have been fastened again.  

  After finishing maintenance work safety precautions should be checked.  

Constructional changes to the dehumidifier. 

  Without written authorization of Totech Europe Ltd no changes,building on or adding to especially 

welding work on carrying parts of the dehumidifier should be made.  

  Only  original  parts  should  be  used,  because  otherwise  no  functional  and  safe  operation  is 

guaranteed. 

 Cleaning of the dehumidifier and storage of waste.  

Substances and materials used should be applied and stored as waste  in an expert way,  in particular 
when working on oil systems and  cleaning work with solvents. 

Guarantee and Liability 

Basically our „General Terms of Sale and Delivery  “apply. These are available for the owner from sale 
agreement at the latest. 

Claims of guarantee and liability with personal and material damage are excluded if they are based on 
one or more of the following causes.  
●   no  original use of the dehumidifier. 

  no expert mounting,commencement of operation, operation and maintenance of the dehumidifier. 

  Operating with faulty safety facilities or no orderly and functional safety and protection facilities. 

  No  compliance  with  instructions  in  the  manual  concerning  transport,  storage,  mounting, 

commencement of operation, operation, and maintenance of the dehumidifier. 

  high-handed constructional changes or high-handed changes of the technical construction. 

  Repairs made unprofessionally. 

  Cases of catastrophy, affection of foreign elements and cases of force majeur. 

  

Содержание U7002
















Отзывы: