PROGRAM
VACATION
SET
CLOCK
MODE
HUMIDITY
OUTSIDE
FAN
At the thermostat, select the mode (Auto,
Heat Cool, or Off).
Adjust the setpoints to the desired settings.
Here, at the base station, press the
corresponding button for 10
seconds. The LED will flash for
5 minutes
Within 5 minutes of pressing
the button on the base station,
press the link button on the receiver for 3 seconds. The LED on
the receiver will flash twice.
The base station will now remember your settings. You may
change these settings at anytime by repeating the above
steps.
Refer to owner’s manual for more details
1
1 4
4 77
RINGS
11
22
33
44
Energy
Comfort
9vAC Power
LINE
Energy Savings Settings are normally used for unoccupied
periods.
Installation & Setup
Page 8
‘Link’ the thermostat to the Base Station for ENERGY SAVINGS
SETTINGS.
At the thermostat, select the mode you would like your Energy Savings
Settings to operate in: Auto, Heat, Cool or Off.
Adjust the set points to the desired Energy Savings Settings.
At the Base Station, press the Energy Savings Settings link button for five
seconds. The green power LED next to the button will turn red and flash for
up to five minutes.
11
22
33
11
22
33
Set the
temperature(s)
Select
the Mode
ANSWER MACH.,
FAX, OR PHONE
