Total TG1101256E, Руководство по эксплуатации

Страница: 11 / 13

11
Maintenance and troubleshooting
Maintenance
Make sure the tool is unplugged before performing any maintenance.
•
Keep the ventilation slots clean and free from obstructions. If possible, blow
compressed air into the vents to remove internal dust (safety glasses should be
worn when performing this process).
• Keep the outer casing of the tool clean and free of grease. Do not wash with
water or use solvents or abrasives. Use only mild soap and a damp cloth to clean
the tool. Never let liquid get inside the tool. Never immerse any part of the tool in
a liquid.
• Your angle grinder does not require additional lubrication.
•
Always store your power tool in a dry and safe place.
• If you see any sparks flashing from the ventilation slots, this is normal and will not
damage your power tool.
Problem solving
Although your new angle grinder is actually very simple to use, if you have problems,
check the following:
•
If it is not working, check the power supply at the mains connection socket.
• If the disc wobbles or vibrates, check that the outer flange is tight; verify that the
disc is properly seated on the flange plate.
• If there are indications that the disc is damaged, do not use it as the damaged
disc may disintegrate, remove it and replace it with a new one. Dispose of old
discs properly and responsibly.
•
If you work with aluminum or similar, the disc will soon get stuck and will not sand
effectively.
Environment
•
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities.
•
Contact your local authority for information on available collection systems.
•
If electrical appliances are disposed of in landfills, hazardous substances can
seep into groundwater and enter the food chain, damaging your health and well-
being.
• Recycle raw materials instead of disposing of them as waste.
•
The machine, accessories and packaging must be classified for environmentally
friendly recycling.