STEP • 6
2ft REAR PANELS
Fix 2ft Wide Blank Section
Last Back Panel 2ft Section
6a. Place the 2ft panel side against the reamining 4ft back
panels as shown making sure the panel is sitting firmly on
the shed floor and the side meeting the framework of the
back 4ft blank panel.
6b. Fix the panels together with screws as shown in diagram.
You may require some supports to keep frames
upright whilst building longer sheds.
Use RED Area as
placement guide.
= Drill Points using
screws provided as shown
x3
4.0 x 70mm
Per Panel Edge
Page 7
6b.
© Sheds (Midlands) Limited 2021
STEP • 7
2ft LEFT SIDE PANEL
Attach Left 2ft Section
Side Wall 2ft Blank Section
7a. Place the 2ft panel side against the corner of the back
2ft floor as shown making sure the panel is sitting firmly on
the shed floor and the side meeting the framework of the
back 2ft blank panel.
7b. Fix the panels together with screws as shown in diagram
7b. You may require some supports to keep the frame upright
whilst building longer sheds.
Use RED Area as
placement guide.
= Drill Points using
screws provided as shown
x3
4.0 x 70mm
Per Panel Edge
7b.
DRILL
DRIVER
DRILL
DRIVER
SKIP Step
Jump to Step 7
NOTICE:
8x6ft
12x6ft
16x6ft
20x6ft
SKIP Step
SKIP Step
SKIP Step
