INFORMATION
Not all Sheds will have the same panel arrangment. Please Ensure that the 4ft Panels are central for all
builds.
STEP • 4
STEP • 5
04
= Drill Points using
screws provided as shown
= Drill Points using
screws provided as shown
© Sheds (Midlands) Limited 2021
www.totalsheds.co.uk
4FT BLANK PANEL
4FT BLANK
PANEL
4b
SIDE PANELS
SIDE PANEL
Fix 4ft Wide Blank
Sections. Create a Corner
for Balance.
4a
. Place a 4ft blank panel side as shown below.
Repeat this step for all larger sheds. Please use reference on left for additional sections required
according to your shed size.
4b.
Screw the panels alongside the framework as shown in Diagram 4b.
x2
4.0 x 70mm
Per Floor Section
x3
x3
4.0 x 70mm
Per Panel Edge
4ft REAR PANEL
4ft REAR PANEL
Fix 4ft Wide Blank Section
Rear Panel 4ft Section
5a.
Now place a blank 4ft panel side as shown. Repeat this step for all other
sheds. Please reference Page 4 for correct sections required according to your shed size.
INFORMATION
Repeat Step 4, making sure that the back
panel sizes corresponds with the floor size.
5b.
It is advisable to have a second person holding the panel in place while the next section is
attached. You may notice that the panels will have nothing to balance on or againts at this stage.
Please use supports if required at this stage untill the corner frames are attached for balance.
4c.
DO NOT fix the panels to the floor
to leave room for adjustments in the
final stages. Next Step will create a
corner frame balance 4ft panels.
