Total Control Products RCKP214, Руководство по установке

Страница: 7 / 41

6
23. Using a 5/16-24 tap, chase the
threads of the split collar brackets.
24. Using a 1/2-13 tap, chase the threads
of the factory-crossmember mounting
holes.
20. Bolt the lower rack brackets to the lower
control arm mounts using the orientation
and hardware shown on page two.
The bracket’s bend will face inward or
outward depending upon the year of the
vehicle.
21. Refer to installation guide (7903-EE-02),
packaged with eccentric eliminator
plates (TCP EE-02), for specifi c
instructions regarding orientation of
plates.
22. The bolts should be snug enough to
remove slack, but loose enough to allow
the brackets to pivot and slide vertically
by hand.