Total Control Products RCKP214, Руководство по установке

Страница: 6 / 41

5
16. Unbolt the lower control arms from
the frame mounts. OEM eccentric
adjustment hardware will be replaced
with hardware supplied with the rack
and pinion.
17. With the suspension at full extension,
the lower control arms can be safely
unbolted. Use caution as the arm may
shift once the bolt is removed.
Loosely Install the Rack and Pinion
18. There are three split-collar clamp/
bracket assemblies that hold the rack in
position. To ensure that the assemblies
provide even clamping pressure around
the rack tube without distorting the tube,
the clamp surface that makes contact
with the rack tube must be free of burrs
or any defects. Carefully inspect the
inside edges and surface of each of
the six clamp halves and remove any
imperfections using a fi le if necessary.
19. Some installations will require the lip
along the lower control arm mounts to
be ground to allow the rack mounting
brackets to properly seat.