P. 8
Turn the Operation Wand and adjust the
Louver to be perpendicular to the Head Rail.
From above, insert the Bottom Cord
connector into the protrusions on each side of
each Balance Weight.
When attaching, be sure to start with the
closest Balance Weight and Bottom Cord.
Be careful that the Bottom Cord does not
become twisted.
Installing the Bottom Cord (Optional)
<For Roll-Type>
Thread the Bottom Cord through the Balance
Weights of all Louvers and cut excess Bottom
Cord.
Balance Weight
Bottom Cord
The Bottom Cord has a connector,
so insert from above.
Balance Weight
Bottom Cord
P. 9
Rotate the Operation Wand to confirm that the Louvers rotate properly.
The problem illustrated below is likely to have occurred if the Louvers fail to rotate properly.
Referring to “Installing the Louver” in step
to
on page 7, attach the Louver correctly. Refit
the Louvers so that they are correctly positioned.
Move slightly the hanger section to
diagonal.
Pull straight down and detach the
Louver.
Checking after fitting, and removing Louvers.
Removing Louvers
Back
Front
Hanger section
Twist to open
Pull down to detach
Diagonal
Pull down
Adjust any misaligned Louvers
so that they are parallel, and
re-attach the Louver.
Straighten any twisted Louvers
and re-attach the Louver.
