background image

P. 2

CAUTIONS

  This manual contains cautions and instructions for safe use of the product.

Please read it carefully before using to ensure appropriate use.

This document illustrates the dangers of using this product without taking necessary 
precautions. Please refer to the symbols below for different types of safety points.

This document illustrates safety points to be followed using the symbols below.

Illustrates that if this product is misused, there are dangers of serious 
injuries or possible fatal accidents.

Illustrates that if this product is misused, there are dangers of 
casualties or possible physical damage of the product.

Illustrates specific actions which are prohibited.

Illustrates specific guidelines which must be followed.

Screws provided are for xylem only. Do not use on materials other than xylem.

Check the foundation base and strength of the material before installing this product. If 
not installed properly to the foundation base, there are dangers of it falling.

Install this product as instructed with the necessary quantity of brackets. Otherwise the 
product may fall.

Warning

Caution

This product is intended for indoor use. Please do not use it for outdoor purposes.

Locations subject to high temperatures and high humidity, or areas where 
water may leak, should be avoided.

Make sure to install this product horizontally.

Precautions upon installing the product (Please read before installation.)

Warning

Caution

Caution

Warning

Japan Blind Industry 

Association

P. 3

Safety During Use (Please read thoroughly)

Please keep the cord or the chain where children cannot 
reach.

Please avoid actions which may result in the cord or the chain 
entangling the body or becoming hooked onto something. 
This may cause an accident.

When not in use, please take the cord and put away the 
handling cord by wrapping it around the safety hook.

Please do not hang from or pull on 
this product. This may damage the 
product or cause it to fall down.

Please do not operate the product with 
sudden or forceful motion. This may 
damage the product or cause it to fall 
down.

When there is strong wind, please 
either close the window or have the 
louver completely opened up.

Please remember to always use the drive 
cord or Operation Wand when operating this 
product. Please do not attempt to move the 
louver directly.
Please do not place any fragile objects or 
objects that may interfere with operation 
near the Louver.

Please do not dismantle the 
mechanical assembly or lubricate the 
moving parts of this product. 
Physical damage or 
malfunction of the 
product will occur.

Please do not use this 
product around open 
flames.

Содержание DUAL 100








Отзывы: