rca-uk.com
RE
N
07
3-14
-v6
-R
EV
1-0
51
7
Setting up power:
Battery Operation
1.1
Unscrew the end cap on the battery wand
at the end
without
the cable protuding.
1.2
Insert 8 x AA Lithium-ion batteries
in to the battery wand – check
that they are pointing in the
correct direction as shown
on the side of the wand.
1.3
Screw back end cap back on and connect the
2-pin cable plug at the other end of the wand into
the plug from the wire protruding out of the blind
headrail
(Fig 1).
The power is now connected.
Fig 1
IMPORTANT:
Do not mix type/brand or old
batteries with new for replacement batteries.
TIP: Mount the battery
wand to the wall using
the brackets provided.
Place the rubber band
beside the bracket
to stop it moving.
AA
x8
Setup & Operating Instructions
AutoMoto
™
Motorised Roman Blind Cassette System
