rca-uk.com
First reset the main headrail motor:
1
Pairing your remote
IMPORTANT:
Only use 1 single channel
remote for this programming procedure.
✔
✖
1.4
Connect the relevant mains adaptor plug front to the
transformer by twisting into position (as shown below)
1.5
Connect the 2-pin cable plug into the wire protruding
out of the blind headrail
(Fig 1).
The power is now connected.
‘CLICK’
Setting up power:
Mains Operation
Fig 1
Now pair your remote:
2
Your remote is now PAIRED!
Ensure that there is power running to the main
headrail. Now locate the motor
reset button
which is in a small hole within the headrail
channel on the silver coloured motor close
to the wiring end. Using a paperclip or a thin
watchmaker’s screwdriver press-and-hold-down
the
reset button
for
2-3 Secs
until the headrail
motor jogs, then release.
Program
Store Button
Find the
Program Store
Button
on the reverse
of your single channel
remote handset and press
with a thin watchmaker’s
screwdriver or a paperclip
until the headrail motor
jogs, then release.
