rca-uk.com
Resetting your blind/Restoring to factory default
IMPORTANT:
This step can erase all memory or any previously
recorded settings! Ensure you follow this procedure carefully
Press & hold
for 2 secs
Press & hold
for 7 secs
Press & hold
for 12 secs
After 1 jog
…followed by pressing ‘program
store’ button on a handset adds
the control to the motor.
After 2 jogs
All controls deleted
(but end limits remain)
After 3 jogs
Motor has been reset
to factory default
Release the program button after:
1 jog –
followed by pressing the programming
button on a handset, wall switch or sensor adds
the control to the motor.
2 jogs –
deleted all controls (end limits remain).
3 jogs –
results in a comlete factory reset.
Locate the motor
reset button
which is in a small
hole within the headrail channel on the silver coloured
motor close to the wiring end. Using a paperclip or a
thin watchmaker’s screwdriver press-and-hold-down
the
reset button
for up to
12 Secs
for all 3 jogs
(release at desired jog as shown below)
IMPORTANT:
All handheld remote control
settings linked with the roman blind headrail will
be deleted along with the limit programming and
any sensors that have been programmed.
Your remote control wall hook
Each handheld remote comes with a handy wall
hook. To install, simply drill a hole at desired position
and screw in the metal screw-adapter provided.
Finally scew your hook in place untill firm and secure.
TIP: Always wear the correct safety goggles if drilling.
REN073-14-
v10_1121
