rca-uk.com
Reverse the direction
3.1
To reverse the direction of the motor, press
and hold the
my
button until the blind shunts.
3
Press & hold
for 3 secs
STOP
Press & hold
for 1 sec
STOP
3.2
Press and hold the DOWN button to test that
the motor direction is correct.
Set your
upper limit position
4.1
Press and hold the UP button to move the
blind until it reaches your desired upper limit
position – should you go too far and need to adjust
back down then simply press the down button
untill you reach the upper limit position.
4
4.2
Press and hold the
my
and DOWN buttons
together until the blind starts to automatically move
down (it will run until you complete the next step –
so be prepared to stop at desired lower position).
4.3
To stop the blind at the desired lower limit
position briefly press the
my
button (adjust with
Up or Down if required).
Programming your remote
continued
IMPORTANT:
Please read and understand
both steps
4.2
and
4.3
before progressing!
TIP: We recommend you
carry out this step with your
roman blind fabric fully
assembled and corded-up on
the roman blind headrail.
TIP: The motor is quick – so use short presses
of the DOWN or UP button for accurate control.
