Toshiba X200 Скачать руководство пользователя страница 159

Страница: 159 / 234

159

Utilities

Fingerprint Authentication Utility

Select Registrations.

Select a registration.

Click Delete.

How to Delete the Fingerprint Data

Fingerprint data is stored in the non-volatile memory. If the
computer changes ownership, Toshiba recommends the following
procedure:

Click Start, All Programs, Protector Suite QL, and then
Control Center.

The Protector Suite Software screen is displayed.

Click Fingerprints then Delete.

Click Settings then Fingerprint Storage Inspector.

The Fingerprint Storage Inspector screen is displayed.

If other fingerprint data is still displayed on the list, hold down
the

Ctrl

key and select each fingerprint until they are all

selected, then click Remove.

Click OK to make the changes permanent.

Check that all Fingerprint data was deleted on the Fingerprint
Storage Inspector screen.

Care and maintenance of your fingerprint reader

Failure to follow these guidelines and/or procedures might result in
damage to the reader or cause reader failure, finger recognition
problems, or lower finger recognition success rate.

❖

Do not scratch or poke the reader with your nails or any hard or
sharp objects.

❖

Do not press the reader with too much pressure.

❖

Do not touch the reader with a wet finger or any wet objects.
Keep reader surface dry and free of water vapor.

❖

Do not touch the reader with a soiled finger. Minute foreign
particles on a soiled or dirty finger may scratch the reader.

❖

Do not paste stickers or write on the reader.

❖

Do not touch the reader with a finger or any object with built-
up static electricity.

Содержание X200











































































































































































































































Результаты поиска

Содержание X200

Отзывы:

Похожие инструкции для X200

Бренды по названию

Популярные бренды

Toshiba X200, Руководство пользователя

Результаты поиска

Содержание X200

Отзывы:

Похожие инструкции для X200

Бренды по названию

Популярные бренды