Disassembly and Reassembly
Toshiba
4-17
1-2-23 Slider S, T Ass’y Removal
1) Move the Slider S, T Ass’y
Œ
,
´
to slot, and then
lift it to remove. (Refer to arrow)
Œ
SLIDER S ASS`Y
´
SLIDER T ASS`Y
Fig. 4-33 Slider S, T Ass’y Removal
1-2-24 Plate Ground Deck, Cylinder Ass’y Removal
1) Remove the 3 Screws
Œ
.
2) Lift the Plate Ground Deck
´
.
3) Lift the Cylinder Ass’y
ˇ
.
Assembly
:
1) Match the 3 holes in the bottom of Cylinder ass'y
ˇ
to the 3 holes of Main Base as attending not to
drop or knock the Cylinder ass'y
ˇ
.
2) Tighten the 1 Screw
Œ
.
3) Match the Plate Ground Deck
´
to the Hole of
Base Main.
4) Tighten the other 2 Screws
Œ
.
Note
:
1) Take care not to touch the Cylinder Ass'y
ˇ
and
the tape guide post at reinstalling.
2) When reinstalling, Don't push down too much on
Screw Driver.
Œ
3 SCREWS
´
PLATE GROUND DECK
ˇ
CYLINDER ASS'Y
Fig. 4-34 Plate Ground Deck, Cylinder Ass’y Removal
