Trouble
s
hooting
The appliance does not start or it stops during operation. Initially, try to find a solution
to the problem, based on the table below. If there is none, contact the service center.
.
Description
Reason
Solution
Restart after the door is closed
.
Check if the clothes
are
stuck
Door is not closed properly
Door can’t be
opened
Washer's safety
protection design is working
Disconnect the power, restart
the product
Water leakage
The connection between inlet
pipe or outlet hose is not tight
Check and fasten water pipes
Check outlet hose
Clean and wipe the detergent
box
Abnormal noise
Check if the
transport
bolt
s
have
been removed
Check
if
it’s installed on a solid
and level floor
Indicator or display
does not light
Electrical power cord may
not be
plugged in or
connection may be loose.
Make sure plug fits tightly in
wall outlet.Check
if
the power
plug is connected correct
ly
.
Washing machine
cannot start up
Detergent residues
in the box
Detergent is damp
or
lumpy
10
27
MAINTENANCE
Note!
Description
Reason
Solution
Check if the water pressure is
too low
Straighten the water pipe
Check if the inlet valve filter is blocked
Check
if
the
drain hose is blocked
Water
filling
problem while
washing
Long
draining
time
Try to do the operation again.
If problem persists, call for
service.
Others
Water overflow
Stop using the washing machine
and call the service center for repair
Restart after the door is closed
Check if the clothes
are
stuck
Door is not closed properly
•
shows other alarm codes again,call for service.
After checking ,activate the appliance. If th
e
problem still occurs or the display