9
12
INSTALLATION
1.
Check if the legs are closely attached to the cabinet. If not, please turn them to
their original position
then
tighten the nuts.
2.Loosen the lock nut
then
turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a wrench, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To
prevent leakage or water damage, follow the
instructions below
Do not kink, crush, modify or cut
the water inlet hose
2
3
4
1
Raise
Lower
Lock
nut
foot
Warning!
！
Warning!
！
Loosen clamp nut and
four bolts
Press the tap end
against the rubber ring
inside the clamp then
tighten the 4 screws.
Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2
3
4
1
Connection finished
clamp nut
Tap with threads and inlet hose
Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
