10
INSTALLATION
Installation
Before installing the machine, the location characterized
as follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0 C
5.Keep far away from the heat resources such as coal or gas.
°
Unpacking the washing machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
Make sure the small
triangle
foam is removed
together
with the bottom
foam
. If not, lay the unit down
on its side,
then remove the small foam from the unit bottom manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Please
do
the following steps to remove the bolts:
1.Loosen 4 bolts with spanner and then remove them.
2.Cover the hole
s
with transport hole plugs.
3.Keep the transport bolts properly
,
for future use.
Remove transport bolts
• Stability is important to prevent the product from
moving
!
• Make sure that the product
does
not stand on
the power cord.
Warning!
！
• Packaging material (e.g. Films, Styrofoam) can be
dangerous
to
children.
• There is a risk of suffocation ! Keep all packaging
materials
well away from children.
Warning!
！
• You must remove the transport bolts from the back
,
before using the product.
• You’ll need the transport bolts again if you
will transport
the product , so
make sure
you keep them in a safe place.
Warning!
！
w
w
W
20mm
>
Installation area
