12
S
e
t
t
i
n
g
u
p
t
h
e
P
r
o
j
e
c
t
o
r
Connecting a Video Player
1 If your video player uses a round, one-prong composite video con-
nector, you’ll need only the A/V cable that shipped with the projec-
tor.
•
If your video player uses a round, four-prong S-video connector,
you’ll need an S-video cable in addition to the A/V cable.
2 Plug the A/V cable’s yellow connector into the “video-out” port on
your video player (Figure 11). This port may be labeled “To Moni-
tor.”
•
If you’re using an S-video cable, connect it to the “s-video out”
connector on the video player (Figure 12).
3 Plug the other yellow connector into the composite connector on the
back of the projector.
•
If you’re using S-video, plug the other end of the cable into the
“s-video” connector on the projector (Figure 12).
F
IGURE
11
Connecting the projector to a video player using the standard A/V cable (with
composite video connector)
audio/video cable
