![background image](http://html.mh-extra.com/html/toshiba/suremark-4610/suremark-4610_service-manual_429109036.webp)
Supported thermal paper
Note:
Using an inferior grade of paper can affect print quality as well as the life of the printhead and the
printer mechanism.
The paper used in the thermal receipt station must meet the following requirements:
Width
3.13 ± 0.02 in (79.5 ± 0.5 mm)
Outside Diameter
4 in (102 mm) maximum
Thickness
0.00236 in (60 µm) optimal. Range 0.00161 in (41 µm) minimum to 0.00389 in (99 µm) maximum.
Important:
Paper has a significant manufacturing tolerance, and nominal paper designations do
not reflect actual measurements. The manufacturing tolerance must fall within the
published operating thickness range. Customers should test paper in their specific
configuration before use. The intent of this specification is that if any spot
measurement of the paper is outside the specified range, the paper is deemed not to
meet the specification and the customer is responsible for any problems caused by
paper jams.
The paper must be wound with the printing side facing out. The paper should not be attached to the core
in any manner.
Important:
Printer reliability and performance are directly related to the quality of the supplies used by the
customer. The published parameters for printer performance are established using supplies
that meet the specifications listed above.
Thermal paper with watermarks, coupons, or advertisements printed on the front or back of
the paper
is not covered by Toshiba specifications.
Some inks and printing processes work
acceptably, but others do not. Printer problems that are caused by supplies that do not meet
Toshiba specifications might result in a billable service call, regardless of the existence of a
service contract.
A list of supported paper and suppliers are available from the Toshiba support site. To check for updated
printer paper information, complete the following steps.
Note:
Changes are made periodically to the Toshiba support site. The actual procedure might vary slightly
from what is described in this document.
1. Go to the Toshiba support site.
2. Under
Peripherals
, click
SureMark Printers
; locate the your 4610 printer.
3. Click on
OEM Paper Testing
; then, scroll down the page to the table containing suppliers and their
contact information.
Note:
Toshiba Brand POS Supplies - Are available from the Nashua Corporation, a premier manufacturer
and marketer of thermal specialty papers produces and markets point-of-sale receipt paper under
the Toshiba brand. Only papers that are included on Toshiba’s tested list are available under the
Toshiba brand. For more information, contact Vince Hanhold at 330-835-3554 or
[email protected].
Cleaning recommendations
You should inspect your 4610 unit periodically and clean the cover as required. Use a soft, clean cloth with
warm, soapy water to clean the plastic parts. Do not use abrasives or any alkaline, ammonia, or
chloride-based cleaner.
18
SureMark Hardware Service
Содержание SureMark 4610
