Toshiba SureMark 4610-SJ6, Руководство пользователя

Страница: 37 / 52

Table 5. 9-pin to 9-pin EIA-232 connector layout (continued)
System Description Printer Description
Pin 7 - RTS (output) Pin 7 - RTS (input)
Pin 8 - CTS (input) Pin 8 - CTS (output)
Table 6. 25-pin to 25-pin EIA-232 connector layout
System Description Printer Description
Pin 2 - Tx (output) Pin 3 - Rx (input)
Pin 3 - Rx (input) Pin 2 - Tx (output)
Pin 4 - RTS (output) Pin 7 - RTS (input)
Pin 5 - CTS (input) Pin 8 - CTS (output)
Pin 6 - DSR (input) Pin 6 - DSR (output)
Pin 7 - Gnd Pin 5 - Gnd
Pin 20 - DTR (output) Pin 4 - DTR (input)
USB connector pin assignments
SureMark printers contain a USB port, if the USB feature is installed. This port is on
the interface card, accessible under the printer without removing printer covers.
Connection to the port can be with either the standard USB Type B connector,
which requires a 24 V power brick, or with the powered USB connector, which
contains 24 V power lines within the communications cable.
The standard USB Type B connector has the following pin functions:
Table 7. Standard USB connector pin assignments
Pin Signal
1 Vbus (+5 V dc)
2 Minus data
3 Plus data
4 Ground
Resident code page
The code page is controlled by the fiscal printer microcode. Refer to the
programming guide for your printer model and country. (See the Toshiba support
Web site and select
Publications .)
Thermal printing font
There are three font sizes for the resident character set on Model SJ6.
v
Font A is 10 dots (wide) × 20 dots (high) with the last 2-dot row used for
descenders.
(1.25 mm × 2.5 mm character height including descenders, 1.25 mm × 2.25 mm
excluding descenders)
v Font B is 12 dots (wide) × 24 dots (high) with the last 2-dot row used for
descenders.
Appendix C. Technical information
21
|
|
|
|