Toshiba SureMark 4610-SJ6, Руководство пользователя

Страница: 36 / 52

Table 3. Cash drawer connector pin assignments
Pin Signal
1 Not connected
2 Solenoid 1 driver
3 Cash drawer status
4 +24 V dc
5 Solenoid 2 driver
6 Ground
The cash drawer solenoids should be connected between pins 4 and 2 for cash
drawer 1 and between pins 4 and 5 for cash drawer 2. A Y-cable is required to bring
out all the appropriate lines to attach the two units.
The cash drawer status line has a 10k resistor pull-up connected to the +5 V dc.
Note: The drawer sensor should switch pin 6 to pin 3 when the drawer is open.
EIA-232 connector pin assignments
SureMark printers contain a 9-pin D-shell connector port for EIA-232
communication. This port is on the interface card, accessible under the printer
without removing printer covers. The connector has the following pin functions:
Table 4. EIA-232 connector pin functions
Pin Signal Pin Signal
1 DCE 6 DSR
2 Transmit 7 RTS
3 Receive 8 CTS
4 DTR 9 RI
5 Signal ground
EIA-232 parameters
Baud rate 115 200 kbps.
Start 1 bit
Data 8 bits
Parity None
Stop 1 bit
Table 5. 9-pin to 9-pin EIA-232 connector layout
System Description Printer Description
Pin 2 - Rx (input) Pin 2- Tx (output)
Pin 3 - Tx (output) Pin 3 - Rx (input)
Pin 4 - DTR (output) Pin 4 - DTR (input)
Pin 5 - Gnd Pin 5 - Gnd
Pin 6 - DSR (input) Pin 6 - DSR (output)
20
4610- SJ6 Fiscal Printer User's Guide