Toshiba SureMark 4610-SJ6, Руководство пользователя

Страница: 35 / 52

Appendix C. Technical information
General description
All SureMark printers print the customer receipt using a thermal print head.
Thermal printing occurs by placing a heating element against a thermally sensitive
paper. By energizing the elements, dots are formed. Thermal printers print dot rows
horizontally across the page; 576 dots make up a single dot row across the paper.
Printing continues row by row until the entire character is formed.
Specifications
Table 2. Station characteristics
Characteristic Customer receipt station
Speed (see note
following table) 39.2 lps at 6 lpi, 52 lps at 8 lpi (maximum)
Print speeds are determined by the document type being printed.
Paper Width 80 mm (3.54 in.)
Print Width 34 characters at 12 cpi
44 characters at 15 cpi
48 characters at 17 cpi
57 characters at 20 cpi
Pitch 12, 15, 17, 20 cpi
20 cpi
Note: In order to conserve power, the SureMark SJ6 reduces its throughput when
printing high print densities, such as logo messages or full black lines.
Because these types of print messages are used on a limited basis, the
overall performance when printing a customer receipt is not noticeably
affected.
The reduced print speed is based on the number of print dots that are turned
on for a given print line, which is defined as dot utilization. Dot utilization is
typically low for normal character printing and up to 100 percent for full
black-line printing. The SureMark printer operates at 52 lps (maximum) at
low dot utilization, and at slower speeds as the dot utilization increases.
Fiscal memory and electronic journal
The SJ6 contains a 1 MB fiscal memory and 1 GB fiscal electronic journal (MFD).
Cash drawer connector pin assignments
The SureMark SJ6 has a single cash drawer connector. This connector can drive
either a single cash drawer or two cash drawers using a special cable. The
connector also provides a status line which indicates if one of the cash drawers is
open.
Drive voltage for each cash drawer solenoid is 24 V dc at a current of 1 ampere.
Connector pins are assigned as follows:
© Copyright Toshiba Global Commerce Solutions, Inc. 2013
19
|