Toshiba Strata CS, Руководство пользователя

Страница: 267 / 378

C
HAPTER
18. C
USTOMIZING
V
IEW
P
OINT
18-11
Changing ring patterns
You can change how your phone rings when you receive an incoming call. You can set different
ring patterns for internal and external calls.
1.
Choose Tools > Options . The Options dialog box opens.
2.
Click the Phone \ Ring Patterns tab.
3. Under
Ring patterns
, select the type of ring that you want for
Internal calls
and
External calls . The “Splash ring” settings create a group of short rings followed by a
pause.
To test a ring pattern, click the button to the right of the dropdown list. Your phone
rings three times in a demonstration of that ring. Because the ring pattern derives from
a continuous loop, the first one might be truncated. Listen for the subsequent rings to
hear the pattern accurately.
Note:
On some systems, Splash ring 3 plays as Splash ring 2, and Short ring, Long
ring plays as Long ring, Short ring. This occurs if your Strata CS Server uses Dialogic
DM/IP Internet telephony boards, DI/SI or HDSI station boards, or DM/V conference
bridge boards. Your Strata CS administrator can tell you if your system behaves this
way.
4. Click
OK
.
Note:
If your ring patterns do not begin correctly, it may be because you are sending Caller ID
data to a display phone. See “Displaying Caller ID on a phone” on page 18-8.
Enabling and disabling hands-free answering
For an overview of hands-free answering, see “Using hands-free answering” on page 4-4. Use
the following procedure to enable or disable hands-free answering from ViewPoint:
1. On the main menu, click
Tools > Options
. The Options dialog box opens.
2.
Click the Phone \ Hands-Free tab.
3.
Select the Enable hands-free answering check box to enable hands-free answering.
Clear the check box to turn hands-free answering off.
4.
Enter the desired time in the Dial tone time-out seconds . This setting identifies how
long a dial tone plays after the end of a call before the station reverts to silence while
it waits for the next call. A setting of 0 indicates no dial tone, which means that the
station reverts to silence as soon as a call ends.
5. Click
OK
.
Note:
You can also pick up the phone and press *10 to enable and disable hands-free
answering.