User’s Manual
4-6
Operating Basics
Removing the Reserve Pen
To remove the Reserve Pen case, follow the steps below.
1. Save your work.
2. Turn the computer’s power off. Make sure the
Power
indicator is off.
3. Remove all cables connected to the computer.
4. Close the LCD display panel and turn the computer upside down.
5. Remove the battery pack.
6. Remove the Reserve Pen from the pen holder.
Figure 4-6 Removing the Reserve Pen
7. Reinstall the battery pack.
Inserting the Reserve Pen
1. Remove the battery pack.
2. Gently push the Reserve Pen into the pen holder to insert it.
Figure 4-7 Inserting the Reserve Pen
Do not continue to use a broken pen tip as this may result in scratching of
the LCD display panel. When the pen tip breaks replace it with one of the
refills delivered with the Tablet PC Pen. When these refills have run out,
you can purchase a new pen set from a TOSHIBA authorized dealer.
Reserve Pen
Refer to the
section in Chapter 6, Power and
Power-Up Modes for more information on how to remove and reinstall the
battery pack.
Pen holder
Reserve Pen
