background image

User’s Manual

v

FCC information

FCC notice "Declaration of Conformity Information"

This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to part 15 of the FCC rules. These limits 

are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, uses and can radiate 

radio frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC conditions

This device complies with part 15 of the FCC Rules. Operation is subject to 

the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including 

interference that may cause undesired operation.

Contact

Only peripherals complying with the FCC class B limits may be attached to 

this equipment. Operation with non-compliant peripherals or peripherals 

not recommended by TOSHIBA is likely to result in interference to radio 

and TV reception. Shielded cables must be used between the external 

devices and the computer's external monitor port, USB port, serial port, 

parallel port, PS/2 mouse/keyboard port and microphone jack. Changes or 

modifications made to this equipment, not expressly approved by 

TOSHIBA or parties authorized by TOSHIBA could void the user's 

authority to operate the equipment.

Address:

TOSHIBA America Information Systems, Inc.
9740 Irvine Boulevard
Irvine, California 92618-1697

Telephone:

(949) 583-3000

Содержание Satellite Pro T110D
































































































































































Отзывы: