1-10
User’s Manual
Introduction
Low Battery
Automatic
Hibernation
*1
When battery power is exhausted to the point
that computer operation cannot be continued, the
system automatically enters Hibernation Mode
and shuts down.
This can be specified in the Power Options.
TOSHIBA HDD
Protection
This feature uses the acceleration sensor built in
the computer to detect vibration, falls and
shocks, and automatically moves the hard disk
drive's read/write head to a safe position in order
to reduce the risk of damage that could be
caused by head-to-disk contact. Refer to the
Using the Hard Disk Drive (HDD) Protection
section in Chapter 4,
Operating Basics
, for more
details.
The TOSHIBA HDD Protection function does not guarantee that the hard
disk drive will not be damaged.
Hibernation Mode
This feature lets you turn off the power without
exiting from your software. The contents of main
memory are saved to the hard disk so that when
you turn on the power again, you can continue
working right where you left off. Refer to the
Turning off the power
section in Chapter 3,
Getting Started
, for details.
Sleep Mode
If you have to interrupt your work, you can turn
off the power without exiting from your software.
Data is maintained in the computer's main
memory so that when you turn on the power
again, you can continue working right where you
left off.
*1 Click ,
Control Panel
,
System and Security
, and then click
Power
Options
.
