manualshive.com logo in svg

Toshiba Satellite Pro A500 series, Руководство по обслуживанию

Поделиться
Скачать
Toshiba Satellite Pro A500 series Скачать руководство пользователя страница 168

4 Replacement Procedures 

4.4 HDD 

4-18 

Satellite/Satellite Pro/A500/A505/A507/dynabook     Maintenance Manual 

Installing the HDD 

Install the HDD according to the following procedures and Figures 4-5, 4-6. 

CAUTION:  To avoid damage, always hold the HDD only by its sides. 

1.

 

Attach the HDD chassis. 

2.

 

Secure the HDD and its chassis with the four M3x4 white head screws. 

CAUTION:  To prevent the HDD bracket from being distorted when installing the HDD 
pack into the computer, do not press the center of the HDD pack. Always hold the HDD 
pack by its sides. 

3.

 

Install the HDD pack into the correct position in the computer. Connect the HDD 
pack to the computer, holding the HDD pack by its sides. 

4.

 

Insert the HDD pack. 

5.

 

Secure the HDD pack with one M2x3 black flat head screws. 

6.

 

Secure the HDD cover by tightening the HDD cover screw. 

Содержание Satellite Pro A500 series






























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды