Toshiba Satellite Pro A500 series, Руководство по обслуживанию

Страница: 121 / 285

3 Diagnostic Programs 3.7 Storage
LBA Start, LBA End
--Specify the start and end byte in LBA (Large Block
Address).
Percent
—Specify the coverage rate in percentage of the total disk.
Time Limit(h):
Choose or Input the time (hour) of the defined range of the total
disk to be tested.
Time Limit(m):
Choose or Input the time (minute) of the defined range of the
total disk to be tested.
Test Mode
—Choose test mode from the following options:
(1) Read & Write
–Write data on the disk, then read it out and compare the two
value;
(2) Read Verify
—Read data only;
(3) Unprotected Write
—Write data on the disk without backup original data.
Option
—Select sequential test or random test
2. Sequential/Random Seek
The test item is to check the correctness of the HDD’s sector’s seeking function.
This test item involves the following parameters:
IDE HDD Test Range
—is same as the description of the upper item.
LBA Start, LBA End
-- specify start and finish byte in LBA(Large Block
Address);
Option--
Select sequential test or random test;
48
Satellite A500 Maintenance Manual