Use a point size 0 Phillips screwdriver to remove and fasten the screws.
The use of an incorrect screwdriver can damage the screw heads.
Installing a memory module
To install a memory module, do the following:
1.
Click
Start -> (Power)
and then click
Shut down
while holding
down the
SHIFT
key. Ensure that the
Power
indicator is off.
2.
Remove the AC adaptor, all cables, and peripherals connected to the
computer.
3.
Close the display panel.
4.
Turn the computer upside down and remove the battery pack.
5.
Loosen the screws securing the memory module cover in place. Note
that the screw is attached to the cover in order to prevent it from being
lost.
6.
Slide your fingernail or a thin object under the cover and lift it off.
Figure 4-11 Removing the memory module cover
1
1
2
1. Screws
2. Memory module cover
Product appearance depends on the model you purchased.
User's Manual
4-29
