4-46
430 Series
Installing the FL Inverter Board (DSTN)
To install the FL inverter board, follow the steps below and refer to Figure 4-44.
1.
Seat the
FL inverter board
.
2.
Connect the
FL inverter cable
to
CN1
and the
FL cable
to
CN2
on the FL
inverter board.
3.
Secure the
FL inverter board
with
two M2.5x6 screws
. Be sure the contrast
control wheel is fitted into its opening in the case.
4.
Connect the
contrast control cable
to the
contrast control board
.
NOTE
: Support the back of the display with your hand when you secure the
screws.
5.
Secure the
contrast control board
with
one M2.5x6 screw
. Be sure the left
screw secures the ground cable.
6.
Replace the tape on the FL inverter cable.
7.
Install the display mask, optional memory card, optional PC card and battery pack
as described in Sections 4.16, 4.4, 4.3, and 4.2.
Содержание Satellite Pro 430CDS
