56
Getting Started
Adding memory
5.375 x 8.375 ver 2.3
For more information on memory options, check the
accessories information that came with your computer, or
visit
Installing a memory module
Your computer has two memory module slots. One slot is
under the keyboard and should only be accessed by a Toshiba
authorized service provider. The other memory module slot is
accessible on the bottom of your computer, and memory
capacity can be upgraded by removing and replacing the
memory module in that slot. You will need a standard Phillips
No.1 screwdriver for this procedure.
Before adding external devices or memory, Toshiba
recommends setting up your software. See
.
To avoid damaging the computer’s screws, use a standard
Phillips No. 1 screwdriver that is in good condition.
Installing a memory module with the computer’s power on may
damage the computer, the module, or both.
Before you install or remove a memory module, turn off the
computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or
Hibernation mode, data will be lost.
If the computer is on, begin at step
; otherwise, skip to step
NOTE
