Chapter 7.
Playback Settings
50
Enable Crossfade
If set to
Off
, crossfade is disabled. If set to
Always
, songs will
always crossfade into one another. If set to
Shuffle
, crossfade is enabled when
the shuffle feature is set to
Yes
, but disabled otherwise. If set to track skip only,
tracks will only crossfade when you manually change tracks.
Fade In Delay
The “fade in delay” is the length of time between when the crossfade
process begins and when the new track begins to fade in.
Fade In Duration
The length of time, in seconds, that it takes your music to fade in
once the
Fade In Delay
has ended.
Fade Out Delay
The “fade out delay” is the length of time between when the crossfade
process begins and when the old track begins to fade out.
Fade Out Duration
The length of time, in seconds, that it takes your music to fade out
once the
Fade Out Delay
has ended.
Fade Out Mode
If set to
Crossfade
, one song will fade out and the next song will
simultaneously fade in. If set to
Mix
, the ending song will continue to play as
normal until its end, while the starting song will fade in from under it.
Mix
mode
is not used for manual track skips, even if it is selected here.
Note:
The rules above apply except in the instance where
Fade Out Delay
plus
Fade
b
Out Duration
is less then
Fade In Delay
(which would create a gap in the audio).
In this case, the
Fade In Delay
is reduced to eliminate the gap.
The graphic below illustrates how the different settings work in practice.
The Rockbox manual
Toshiba Gigabeat F Series
