AI C
ENTRAL
R
EMOTE
C
ONTROLLER
– 7 –
→
→
Procedure
Page
Remarks
Supply power to Central Remote Controller
and the respective indoor unit.
STARTING THE CONNECTED AIR CONDITIONERS
To start the air conditioner press the MONITOR/SET
8
The display changes from monitor to set.
button.
Select the setting mode
8
a) SINGLE SELECT
The operational conditions for one air
conditioner or group.
b) SELECT ALL
The operational conditions for every air condit-
ioner connected to the Central Remote Controller.
Setting of the operation modes and fan speeds
9
The settings can be verified by looking
are carried out by pressing the respective buttons.
at the LCD display.
To start the air conditioner press the ON button.
8
Select the restriction in use by pressing
11
SELECT CONTROL.
NO DISPLAY
11
Last touch priority.
CENTRAL
In the Central mode, operation of the air
conditioner is restricted to ON/OFF operation.
LOCKED
In the Locked mode the air conditioner
remains in the OFF mode.
Press the MONITOR/SET button.
8
To register the changes the Central Remote
Controller will change to monitor. The
respective air conditioners will start.
●
If the new settings are not registered by pressing the MONITOR/SET button within 15 seconds of the last change the
status of the Central Remote Controller will revert to the monitor mode without changing any settings.
STOPPING CONNECTED AIR CONDITIONERS
To stop the air conditioner press the
8
The display changes from monitor to set.
MONITOR/SET button.
To select the air conditioner to be switched off press
8
the SINGLE SELECT button or press the
SELECT ALL button if you wish to stop every unit.
Press the OFF button.
8
Press the MONITOR/SET button.
8
To register the changes the Central Remote
Controller will change to monitor. The
respective air conditioners will stop.
O
PERATION
P
ROCEDURE
GB
