Toshiba RAV-SM122KRTP-UL Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 52

background image

Installation Manual

‒

5

‒

5-EN

1

PRECAUTIONS FOR SAFETY

• Ensure that all Local, National and International regulations are satis

fi

ed.

• Read this “PRECAUTIONS FOR SAFETY” carefully before Installation.
• The precautions described below include the important items regarding

safety. Observe them without fail.

• After the installation work, perform a trial operation (test run) to check for any

problem.

Follow the Owner’s Manual to explain how to use and maintain the unit to

the customer.

• Turn off the main power supply switch (or breaker) before the unit

maintenance.

• Ask the customer to keep the Installation Manual together with the Owner’s

Manual.

The manufacturer shall not assume any liability for the damage caused by not
observing the description of this manual.

WARNING

General

• Before starting to install the air conditioner, read through the Installation

Manual carefully, and follow its instructions to install the air conditioner.

• Only a quali

fi

ed installer or quali

fi

ed service person is allowed to do

installation work. Inappropriate installation may result in water or refrigerant
leakage, electric shock or

fi

re.

• Do not use any refrigerant different from the one speci

fl

ed for complement or

replacement. Otherwise, abnormally high pressure may be generated in the
refrigeration cycle, which may result in a failure or explosion of the product or
an injury to your body.

• Before opening the front panel of the indoor unit set the circuit breaker to the

OFF position. Failure to set the circuit breaker to the OFF position may result
in electric shocks through contact with the interior parts. Only a quali

fi

ed

installer or quali

fi

ed service person is allowed to remove the front panel of

the indoor unit and do the work required.

• Before carrying out the installation, maintenance, repair or removal work, be

sure to set the circuit breaker to the OFF position. Otherwise, may result in
electric shocks.

• Place a “Work in progress” sign near the circuit breaker while the installation,

maintenance, repair or removal work is being carried out. There is a danger
of electric shocks if the circuit breaker is set to ON by mistake.

• Only a quali

fi

ed installer or quali

fi

ed service person is allowed to undertake

work at heights using a stand of 19.7

″

(50 cm) or more or to remove the front

panel of the indoor unit to undertake work.

• Wear protective gloves and safety work clothing during installation, servicing

and removal.

01_1121250414-EN.indd 5

01_1121250414-EN.indd 5

14/1/2565 BE 16:50

14/1/2565 BE 16:50

«
...
4
5
6
7
8
...
»

Содержание RAV-SM122KRTP-UL





















































Отзывы:

Нет отзывов

Похожие инструкции для RAV-SM122KRTP-UL

Бренд: AAF Страницы: 4

LI036CI-180P432

Бренд: Lennox Страницы: 56

Бренд: Houghton Страницы: 25

Бренд: Bionaire Страницы: 25

Бренд: EarthLinked Страницы: 16

Enviro-Therm SCE-AC8500B460V

Бренд: SCE Страницы: 17

VRV FXSQ05TBVJU

Бренд: Daikin Страницы: 6

Бренд: Kärcher Страницы: 48

Бренд: Lennox Страницы: 32

Бренд: Yamato Страницы: 68

Бренд: Unical Air Страницы: 49

Бренд: DeLonghi Страницы: 18

Бренд: Daikin Страницы: 16

Бренд: Danby Страницы: 56

Бренд: Goodman Страницы: 14

Бренд: TriStar Страницы: 72

Бренд: Carrier Страницы: 68

Бренд: McLean Cooling Technology Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды