Toshiba RAV-SM122KRTP-UL, Руководство по установке

Страница: 38 / 52

Installation Manual
‒ 37 ‒
37-EN
[Procedure example]
Manual address setup procedure
While the operation stops, change the setup.
(Stop the operation of the unit.)
1
Push the [ MENU] button to display the
menu screen.
Push and hold the [ MENU] button and
the [
4
] button at the same time to
display the “Field setting menu”.
Æ
Push and hold the buttons for more than
4 seconds.
Push the [ CANCEL] button to return.
Push the [
3
] / [
4
] button to select
“DN setting” on the “Field setting menu”
screen, then push the “
Set
Set”
[ F2] button.
Æ The fan and louver of the indoor unit
operate.
When the group control is used, the fan
and louver of the selected indoor unit
operate.
Select the group-controlled function on
the menu screen, then push the
“
Set
Set” [ F2] button.
Push the “ unit” [ F1] button to
select the unit to set.
Æ
The selected unit changes as follows each
time the button is pushed:
1-1 1-2 1-8
Push the “
Set
Set” [ F2] button.
Æ The setting display for the selected unit
appears.
(For a group control, No. of the fi rstly
displayed indoor unit becomes the header
unit.)
2
The indoor UNIT No. in the group control
is displayed in order. Select the indoor unit
of which setup is changed.
In this time, the position of the indoor unit of
which setup is changed can be con
fi rmed
because fan of the selected indoor unit
operate.
3
1. Specify CODE No. [ 12 ] with Move the cursor
to select “Code(DN)” with the “
1
”
[ F1] button, then set “Code(DN)” with the
[
3
] / [
4
] button.
(CODE No. [ 12 ]: Line address)
2. Change the line address from [ 3 ] to [ 2 ] with
Move the cursor to select “Data” with the
“
2
” [ F2] button, then set “Data”
with the [
3
] / [
4
] button.
3. Push the [ MENU] button to set the other
Code (DN) and Data. After “Continue?” is
displayed on the screen, push the
“
Yes
Yes” [ F1] button.
Indoor UNIT No. before setup change is displayed.
4
1. Specify CODE No. [ 13 ] with Move the cursor
to select “Code(DN)” with the “
1
”
[ F1] button, then set “Code(DN)” with the
[
3
] / [
4
] button.
(CODE No. [ 13 ]: Indoor address)
2. Change the Indoor address from [ 3 ] to [ 2 ] with
Move the cursor to select “Data” with the
“
2
” [ F2] button, then set “Data”
with the [
3
] / [
4
] button.
3. Push the [ MENU] button to set the other
Code (DN) and Data. After “Continue?” is
displayed on the screen, push the
“
Yes
Yes” [ F1] button.
01_1121250414-EN.indd 37 01_1121250414-EN.indd 37 14/1/2565 BE 16:50 14/1/2565 BE 16:50