EN
3
Wired remote controller
This remote controller can control the operation of up to 8 indoor units.
■
Before Use
Operate the remote control according to the following procedure when it is used for the
fi
rst time or when the
settings are changed. Pushing the [
ON/OFF] button starts running the air conditioning unit with the settings
made on the remote control from the next time.
Preparation
Turn on the circuit breaker.
• “ Setting” appears on the display of the remote control when the power is turned on.
* When the power is turned on, it takes about 5 minutes before the remote control becomes operable.
This is not a malfunction.
1
2
3
7
8
4,5
6
75
Room A
12:00
Mode
Fan Speed
Cool
F
1
[
MONITOR] button
Displays the monitoring screen.
2
[
MENU] button
Displays the menu screen.
3
[
CANCEL] button
Functions as indicated on the screen, such as
returning to the previous menu screen.
4
[
∧
] button
During normal operation: adjusts the temperature.
On the menu screen: selects a menu item.
5
[
∨
] button
During normal operation: adjusts the temperature.
On the menu screen: selects a menu item.
6
[ F1] button
Varies its function according to the setting screen.
7
[ F2] button
Varies its function according to the setting screen.
8
[
ON/OFF] button
Switching between the normal display and detailed display
Push and hold the [
CANCEL] button and [
MONITOR] button at the same time for more than 4 seconds to
switch the display mode.
The normal display mode is selected as a factory default setting.
Normal display mode (factory default)
82
12:00
Mode
Fan Speed
Cool
F
Energy saving icon
• Displayed when performing the power saving operation of the
air conditioner.
Soft cooling icon
• Shows the air conditioner is performing the soft cooling operation.
Saving icon
• Displayed when performing operation by suppressing excessive
heating or excessive cooling through automatic correction of the
temperature set point.
(*1)
Detailed display mode
75
Room A
12:00
Mode
Fan Speed
Cool
F
Icons appear on the screen when the detailed display mode is
selected.
*1 • The “ Preparing to heat” icon appears when the heating
operation starts or when defrosting operation.
The indoor fan stops or the operation becomes the blowing
operation when it is displayed.
• It may be displayed depending on the model when
“ Preparing to operate” is displayed.
(*1)
– 8 –
15-EN
16-EN
01_OM_1128950202-1_EN.indd 8
01_OM_1128950202-1_EN.indd 8
4/4/2565 BE 11:30
4/4/2565 BE 11:30
Содержание RAV-SM122BTP-UL
Страница 47: ...MEMO MEMO 03_OM_1128950202 1_ES indd 46 03_OM_1128950202 1_ES indd 46 4 4 2565 BE 11 31 4 4 2565 BE 11 31 ...
Страница 48: ...MEMO MEMO 03_OM_1128950202 1_ES indd 47 03_OM_1128950202 1_ES indd 47 4 4 2565 BE 11 31 4 4 2565 BE 11 31 ...
Страница 49: ...03_OM_1128950202 1_ES indd 48 03_OM_1128950202 1_ES indd 48 4 4 2565 BE 11 31 4 4 2565 BE 11 31 ...
