<To re-installation>
- Press the drain pan into the back body.
- Please make sure ribs of drain pan in left
and right side must be install to lock position.
- Press the two center arms of drain pan to back
body.
Back body
Drain pan
Rib of drain pan
Back body
Drain pan
Rib of drain pan
Drain pan
Center arms
of drain pan
Back body
Remarks
1) Follow the procedure item .
2) Remove screw holding the electric part cover.
3) Disconnect the louver motor connector (5P)
from P.C. board assembly.
4) Disconnect the cord motor of Louver VT (5P)
from the Louver VT (L/R) connector.
5) Remove fixing screw of the unit display
and remove unit display.
6) Remove drain pan can be selected remove
drain hose or not remove drain hose following:
- Not remove drain hose;
Pulling out the drain pan from back body,
then holding the drain pan with main unit.
- Remove drain hose;
Drain hose can be removed follow the
procedure item 7 . After that remove the
drain pan from main unit.
Electric part cover
Screw
Connectors
Screw
Unit display
Drain pan
3
Louver motor
connector
P.C.board
3
2
1
Louver motor connector
Louver motor VT (L) connector
Louver motor VT (R) connector
(black)
(black)
Drain pan
assembly
8
No.
Part name
P
rocedure
s
- 104 -
