-10-
1-4-2. HEAT Operation
Operation Steps
Supply Power On
The OPERATION LED on the display panel of the indoor unit starts flashing.
(1)
MODE button
•
Select HEAT mode.
(2)
TEMP button
•
Set the required temperature.
(3)
FAN button
•
Select any of the “AUTO”, “LOW”, “MED” and “HIGH”.
(4)
ON/OFF button
•
Push this button again to start the air conditioner.
•
The OPERATION and DEFROST LEDs light on the remote receiver. After a period of preheating the
DEFROST LED extinguishes and heating operation starts.
Stop:
ON/OFF button
•
Push this button again to stop the air conditioner.
(B) 1-4-4.
FAN ONLY Operation
•
The FAN ONLY mode does not control temperature. Therefore, perform only steps (1), (3) and (4) to
select this mode.
3
2
1
4
(A) 1-4-3.
COOL Operation
Operation Steps
Supply Power On
The OPERATION LED on the remote receiver starts flashing.
(1)
MODE button
•
Select COOL mode.
(2)
TEMP button
•
Push the TEMP. button.
•
Cooling 17°C or higher
(3)
FAN button
•
Select any of the “AUTO”, “LOW”, “MED” and “HIGH”.
(4)
ON/OFF button
•
Push this button again to start the air conditioner.
•
The OPERATION LED on the display panel of the lndoor unit lights. Operation starts after approximately 3
minutes.
Stop:
ON/OFF button
•
Push this button again to stop the air conditioner.
