- 39 -
6.3.3 How to set the timer operation
The following can be chosen sequentially by
pressing [TIMER SELECT] switch:
1)
[TIMER] ON
2)
[TIMER] OFF
3)
[TIMER] ON
→
OFF
4)
[TIMER] ON
←
OFF
5)
[TIMER] CYCLE
•
Be sure to set the present time.
•
In case of reoperating after finishing timer operation, if [TIMER SELECT] is not altered, the timer operation
will be performed again.
Timer ON operation
1) [TIMER] ON is applied.
2) ON/OFF key is pressed. Then LED is lighted.
When the set [ON TIME] comes, the operation starts and OPERATION display appears on the liquid crystal,
and the [TIMER] ON display goes off.
3) LED and OPERATION display goes off upon pressing ON/OFF key for stopping and [TIMER] ON is displayed.
Timer OFF operation
1) [TIMER] OFF is applied.
2) ON/OFF key is pressed. Then LED is lighted and the operation starts with OPERATION displayed on the
liquid crystal.
3) When the set [OFF TIME] comes, the operation stops and the LED, OPERATION display goes off with
[TIMER] OFF displayed.
ON
← →
OFF timer operation
1) [TIMER] ON
→
OFF or [TIMER] ON
←
OFF is applied.
2) ON/OFF key is pressed. LED comes on and the operation is performed as below:
Repeated operation
1) [TIMER] CYCLE is applied.
2) ON/OFF key is pressed. Then LED is lighted and ON
← →
OFF timer operation is repeated according to the
ON time and OFF time (repeating every day as it is a 24-hour timer).
3) The operation key is pressed. LED goes off and operation stops.
Timer stand-by display and operation display
Waiting on the timer is displayed by the LED lighting while the
actual operation is displayed by OPERATION on liquid crystal.
Displaying
actual
operation
Timer mode display
Heronhill - for all your Toshiba requirements
Tel: 01823 665660
www.heronhill.co.uk
Fax: 01823 665807
