Page 18
User Manual
3/4” (or 1/2” )
long Hex-head
screw
Fig. 17A
D. Use a 3/32” drill bit to drill a starter hole
through the middle hole of the top rail into
the window sash frame. Drive one 3/4” (or
1/2”) HEX-HEAD locking screw through the
hole just drilled as shown (Fig. 17A).
Fig. 18
A. 3/4” (or 1/2”) Long Hex Head Screw
B. Left-Hand Accordion Panel Frame
C. Window Sash Frame
Window Sash Frame
A
B
C
E. Extend the accordion panels out against the
window frame.
F. Use a 1/8” drill bit to drill a starter hole
through the hole in the top leg of each
accordion panel frame into the window sash
(Fig. 18 and Fig. 18A). Connect with one 3/4”
(or 1/2”) long hex head screw.
G. Attach the Lock Frames to the window sill
using two 3/ 4 (19mm) screws (Fig.18B) (on
some models).
Window Sash
Seal
Fig. 19
Safety Lock
3/4” (or 1/2” )
Long
Hex-head
Screws
Fig. 19A
Weather seal
A
A. 3/4” (or 1/2”) long
hex head screw
Weather seals
Fig. 18A
A. Trim sash seal to fit window
width. Insert into space
between upper and lower
sashes (Fig. 19).
B. Attach right angle safety
lock (Fig. 19A).
6. Install Window Sash Seal and Safety Lock
Fig. 18B
Fig. 18B
Installa
tion
Instruc
tions
