Page 12
User Manual
Before You Begin
Read these instructions completely and
carefully.
• IMPORTANT
- Save these instructions.
• IMPORTANT
- Observe all governing
codes and ordinances.
We recommend that two people install
this product.
Proper installation is the responsibility of
the installer.
Product failure due to improper
installation is not covered under the
Limited Warranty.
You MUST use all supplied parts and
use proper installation procedures as
described in these instructions when
installing this air conditioner.
Do not, under any circumstances, cut or
remove the third (ground) prong from
the power cord.
Do not change the plug on the power
cord of the air conditioner.
Aluminum house wiring may present
special problems - consult a qualified
electrician.
When handling the unit, be careful to
avoid cuts from sharp metal edges and
aluminum fins on front and rear coils.
Please wear cut-resistance gloves
Installa
tion
Instruc
tions
WARNING
Save carton and these Installation
Instructions for future reference.
The carton is the best way to store the
unit when not in use.
NOTICE
INSTALLATION INSTRUCTIONS
Perform a preliminary check of your installation per
Preliminary Instruction steps 1-5.
Unit Height:
17-5/8”
Unit Width:
23-5/8”
Min. Window Opening:
18-1/2”
Min. Window Width:
28”
Max. Window Width:
40-1/2”
Preliminary Instructions
Window Sash Seal
Top Rail
Foam Gasket
3/4” Long Flat Head Bolt
Sill Angle Bracket
1 /2” Long
Screw and
Locknuts
Window
Support
Bracket
Accordion
Panel
Assembly
(Right)
Side
Retainer
Washer Head
Locking
Screw
Bottom Rail
Seal to Unit
Accordion
Panel
Assembly
(Left)
Safety Lock and
3/4” (or 1/2” ) Long
Hex Head Screw
Locknuts