manualshive.com logo in svg

Toshiba Qosmio G50 Series, Руководство по обслуживанию, Страница: 15 / 446

Поделиться
Скачать
Toshiba Qosmio G50 Series Скачать руководство пользователя страница 15

1.1 Features 

1 Hardware Overview 

QOSMIO G50 Maintenance Manual (960-683) 

 [CONFIDENTIAL] 

1-1 

1 Features 

1.1 Features 

The QOSMIO G50 series are high performance all-in-one PCs running an Intel

®

 Core

TM

 2 

Duo processor (Penryn). 

There some models and options. Refer to the Parts List for the configuration of each model 
and options. 

The features are listed below. 

‰

 

Microprocessor 

The QOSMIO G50 computer is equipped with an Intel

®

 Core

TM

 2 Duo Processor. 

These processors incorporate a math co-processor, a 3MB or 6MB L2 cache memory. 
The PC comes in with one of the following speeds: 

Intel

®

 Core

TM

 2 Duo Processor (Penryn) 

•

 

•

 

•

 

•

 

T9600 (2.80GHz) /T9400 (2.53GHz) / P9500 (2.53GHz)  

 In the case of Processor which built in 6MB L2 cache memory 

P8600 (2.40GHz)/ P8400 (2.26GHz) 

       In the case of Processor which built in 3MB L2 cache memory 

These processors operate at 1066MHz bus clock (FSB). 

‰

 

Memory 

Two DDR2-667/DDR2-800 SDRAM slots. Memory modules can be installed to 
provide a maximum of 4GB. Memory modules are available in 512MB, 1024MB and 
2048MB sizes. 

‰

 

Chipset 

 The QOSMIO G50 is Equipped with Intel GM45/GL40

（

Cantiga (G) MCH

）

 as 

North Bridge, Intel ICH9M as South Bridge and R5C833 as Card Controller. 

‰

 

VGA Controller 

The PC comes in with one of the following two types: 

the internal graphics controller in North Bridge is used. 

nVIDIA NB9E/NB9P/NB9M  is used. 

‰

 

HDD 

Double (or single) 160GB, 200GB, 250GB, 320GB internal serial-ATA drive. 2.5 
inch x 9.5mm height. 

The computer has one 400GB, 500GB internal serial-ATA drive. 2.5 inch x12.5mm 
height. 

Содержание Qosmio G50 Series































































































































































































































































































































































































































































Отзывы:

Нет отзывов