manualshive.com logo in svg

Toshiba Qosmio G50 Series, Руководство по обслуживанию, Страница: 136 / 446

Поделиться
Скачать
Toshiba Qosmio G50 Series Скачать руководство пользователя страница 136

3 Tests and Diagnostics 

3.3 Setting of the hardware configuration 

3-10 

[CONFIDENTIAL] 

QOSMIO G50 Maintenance Manual (960-683) 

7.

 

“Create DMIINFO TXT (Y/N)?” is displayed. Press 

Y,

 then the 

DMI information (text data) is written to the Floppy disk, etc. 

Setting of the HWSC 
Setting of the UUID 
Display of the DMI information (including UUID) 

After completion of the above settings, H/W configuration & DMI 
information are appeared in order. Check the contents and press 

Enter

. 

Subtest 02 

DMI information save 

NOTE:  Before replacing the system board, be sure to execute this subtest and save the 

DMI information to the floppy disk. 

This is one of tools to copy the DMI information to a new PCB after 
replacing.  

This subtest saves all the DMI data in a floppy disk.  

Subtest 03 

DMI information recovery 

This is one of tools to copy the DMI information to a new PCB after 
replacing.  

This subtest writes all the DMI data in the floppy disk into the new PCB.  

NOTE:  Since the data of UUID is updated every time when this subtest, DMI information 

recovery, is done, the saved UUID data is not written. 

 

Содержание Qosmio G50 Series































































































































































































































































































































































































































































Отзывы:

Нет отзывов