133
6
F
3
B
0
3
6
2
c.
Status (See figure 4.3 for details on bits C, D, E and F.)
F
E
D
C
B
A
9
8
7
6
5
4
3
2
1
0
B
0
0
0
0
TermSTS
B+1
Detailed information (Only valid when TermSTS = 0BH.)
d.
Important items
•
This request can be used in run and standby modes.
•
The read out RAS information is stored in the specified register area as shown below.
RAS information
word count
←
Specified register start address
RAS information
←
A register area whose size is the size of the read out
RAS information plus one word must be allocated.
•
A boundary error (TermSTS = 0AH) occurs if it is not possible to allocate an area that is the
size of the read out RAS information plus one word for the RAS information storage area.
•
A parameter error (TermSTS = 03H) occurs on any of the following transfer parameter
settings.
•
If the RAS request type (Kind) is out of range (a value other than 1 to 5).
•
If the start position (Start) is out of range (a value of 4 or larger) for MIB information.
•
If the start position (Start) is out of range (a value of 161 or larger) for event trace
information.
•
If the read count (ReadCnt) is out of range (a value of 31 or larger) for event trace
information.